TSKgel^® G7000H_HR HPLC Column

stainless steel

suitable for USP L21

TSKgel^®

Tosoh 17359

140 ℃ temperature
2 mL/min flow rate
50 bar max. pressure

HPLC: suitable

30 cm × 7.8 mm

polymer particle platform

polystyrene-divinylbenzene phase

5 μm

size exclusion (SEC)

THF can be replaced with acetone, ethanol, quinoline, benzene, o-dichlorobenzene, ethyl acetate, dodecane, FC-113, carbon tetrachloride, dichloromethane, dichloroethane, trichloroethane, n-hexane, cyclohexane, xylene, tetrahydrofuran, chloroform, 1,4-dioxane, hexafluoroisopropanol, toluene, 1-chloronaphthalene, dimethylaceto acetamide, methyl ethyl ketone, trichlorobenzene, m-cresol, dimethylformamide, methylpyrrolidone, o-chlorophenol/chloroform, dimethyl sulfoxide, pyridine

TSKgel G7000Hhr columns are packed with rigid, porous, polymer beads. They are used for the non-aqueous separation of polymers less than 400,000,000 Da.(estimate). TSKgel G7000Hhr columns are shipped in THF, which can be exchanged for a wide variety of organic solvents.
The TSKgel H_HR column line consists of eight columns with different pore sizes, TSKgel G1000H_HR through TSKgel G7000H_HR, and five columns with an extended linear range of the calibration curve. All TSKgel H_HR-type columns are shipped in THF, which can be exchanged for a much broader range of organic solvents than TSKgel H_XL columns, although Hxl columns are more inert. The maximum operating temperature for most TSKgel H_HR-type columns is 140℃, except for GMH_HR columns, which can only be used up to 80℃. TSKgel H_HR-type columns are conventional GPC columns with dimensions of 7.8mm ID x 30cm.

Shipped in THF.

Discover LiChropur reagents ideal for HPLC or LC-MS analysis

TSKgel is a registered trademark of Tosoh Corporation