ApopTag Stop/Wash Buffer

32161000

NA.32

ApopTag Stop/Wash Buffer is intended for use in labeling the 3′-OH ends of fragmented DNA during apoptotic cell detection. Qualified for use with Apoptag In Situ Apoptosis Detection Kits (Catalog Numbers: S7100, S7101, S7111 and S7165).

Materials Provided

Each bottle contains 20 ml of ApopTag Stop/Wash Buffer.



ApopTag is a registered trademark of Serologicals Company.

Instructions for Use

Prepare Working Strength Stop/Wash Buffer by adding:

1 ml ApopTag Stop/Wash Buffer

34 ml dH2O

35 ml Total



This amount is sufficient to treat 5 slides in a coplin jar. Working Strength Stop/Wash Buffer may be prepared in advance and stored in a glass or plastic container at 4°C for up to one (1) year. Use a fresh aliquot for each experiment.



Working Strength Stop/Wash Buffer is ready for use at the "APPLY STOP/WASH BUFFER" protocol step in The Complete ApopTag Manual.



NOTE: Agitate for 15 seconds and incubate for 10 min. at room temperature to avoid precipitation.

CHEMICON is a registered trademark of Merck KGaA, Darmstadt, Germany

100

ApopTag
Chemicon^®

activity assay: suitable (apoptosis)

dry ice

Recommended Storage is -15°C to -25°C.

Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.

GHS05,GHS08

Danger

H290 - H314 - H373

P234 - P260 - P280 - P303 + P361 + P353 - P305 + P351 + P338 - P314

Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A - STOT RE 2 Inhalation

Respiratory Tract

8B - Non-combustible, corrosive hazardous materials

WGK 2