Silver/silver chloride (60/40) paste for screen printing

Ag/AgCl

This product has a ratio of silver to silver chloride of 60/40.

Product Benefits

• Applications in medical diagnostics, environmental sensors
• High conductivity
• Low curing temperature

PROCESSING

• Screen Printing Equipment: semi-automatic, manual

• Ink Screen Life: >3 hours

• Screen Types: polyester, mesh 156 to 230 tpi

Note: Stainless Steel mesh is not recommended, since a paste component can become corrosive in the presence of moisture.Also, plastic palette knives should be used instead of metal knives.

• Typical Drying Conditions: Dry at 60℃ for 30minutes or 80℃ for 10minutes in a box oven.

• Clean up solvent: ethoxyl propanol or seriocol

• Substrate: polyester, PVC, polycarbonate and alumina

Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation

Coverage: 200 cm² per g (using a 156 mesh polyester screen)
Sheet resistivity:<100 miliohms per square (20 micron thick printed on alumina substrate)

paste

2.0-5.5 Pa.s (Haake RS1 C20/2° TiL at 230 sec^-1 at 25℃)

GHS05,GHS09

Warning

H290 - H410

P234 - P273 - P390 - P391 - P501

Aquatic Acute 1 - Aquatic Chronic 1 - Met. Corr. 1

8A - Combustible, corrosive hazardous materials

WGK 3

192.2 °F

89 ℃