您的位置：首页 > 产品中心 > LiChrosorb® Si 60 (5 μm) LiChroCART® 125-4
LiChrosorb® Si 60 (5 μm) LiChroCART® 125-4
产品性质
| material【物料】 | stainless steel column |
| Quality Level【质量水平】 | 100 |
| agency | suitable for USP L3 |
| product line【产品线】 | LiChrosorb® |
| feature【特点】 | endcapped: no |
| parameter【参数】 | 250 bar pressure 60 ℃ max. temp. |
| technique(s) | HPLC: suitable mass spectrometry (MS): suitable (Low) |
| column L × I.D.【色谱柱长度 × 内径】 | 12.5 cm × 4 mm |
| matrix【基质】 | fully porous particle |
| matrix active group【基质活性基团】 | Silica bonding phase |
| Particle size【粒径】 | 5 μm |
| pore size【孔径】 | 60 Å pore size |
| operating pH range【操作pH范围】 | 2 - 7.5 |
| separation technique【分离技术】 | hydrophilic interaction (HILIC) normal phase |
| storage temp.【储存温度】 | no temp limit |
基本信息
| General description【一般描述】 | HPLC cartridge LiChrosorb® Si 60 is a reliable irregular shaped silica sorbents with a pore diameter of 60A for normal phase chromatography.This sorbent is packed into a LiChroCART |
| Analysis Note【分析说明】 | Pressure: ≤ 40 bar Theoretical Plates (N/m) (2-Nitrotoluene): ≥ 50000 Symmetry (2-Nitrotoluene): 0.8 - 1.4 Capacity factor (2-Nitrotoluene): 0.5 - 2.0 |
| Legal Information【法律信息】 | LICHROCART is a registered trademark of Merck KGaA, Darmstadt, Germany LiChrosorb is a registered trademark of Merck KGaA, Darmstadt, Germany |
