Lead paint film for portable x-ray fluorescence analyzers

NA.24

This Standard Reference Material (SRM) is intended as a blank for the Lead Paint Film for Building Surfaces SRMs, which are used for validation of results from portable, hand-held, X-ray fluorescence analyzers when testing for lead in paint coatings on interior and exterior building surfaces. A unit of SRM 2570 consists of a white polyester sheet, approximately 7.6 cm wide, 10.2 cm long, and 0.2 mm thick, coated with a single, lacquer layer, approximately 0.04 mm thick. Each unit is over-coated with a clear, thin, plastic laminate to protect the surface from abrasion. For more information, please refer to the COA and SDS.

SRM 2570_cert SRM 2570 _SDS

NIST is a registered trademark of National Institute of Standards and Technology
SRM is a registered trademark of National Institute of Standards and Technology

100

certified reference material

pkg of 1 film

NIST^®

pharmaceutical (small molecule)

matrix material

13 - Non Combustible Solids

WGK 3