Hamilton^® Samplelock 注射器

32070500

• Twist valve locks the sample in the syringe
• Positive rear plunger stop eliminates sample loss and plunger blowout at high pressures (not applicable to 1705 and 1710 models)
• Connects to either male or female Luer fittings by using an adapter. Male and female luer and male luer lock adapters thread onto the SampleLock valve making the syringe compatible with many connectors and fittings. All adapters have a Kel-F (CTFE) fluid path, with a port diameter of 0.039 in.
• Internal standards can be added through the valve port into the sample contained in the syringe

     

Hamilton^® SampleLock syringe was used in sampling to understand the preference of oxygen to be in gas phase for Oxygen–Water Isotope Exchange experiment for estimation of potassium. It was also used in sampling gas and liquid phase for GC analysis, in isothermal vapor-liquid equilibrium data measured for two binary systems.

We recommend replacement needle Cat. No. 19136-U (22s ga needle) for the 1705SL, 1710SL and 1725SL syringes; Cat. No. 19137-U (22 ga needle) is recommended for the larger syringes. Both replacement needles will fit 250 μL to 10 mL syringes and will fit any SampleLock syringe.

Plunger Assemblies are available for the 1705SL (Cat. No. 26152-U) and 1710SL (Cat. No. 26154) syringes.

Hamilton is a registered trademark of Hamilton Co.
null
null

bevel tip stainless steel needle (point style 2)

22s ga (bevel tip)

syringe type Sample Lock

pkg of 1 ea

Hamilton 81056

51 mm (2 in.)

100 μL