Parker^® Chromgas^® 零空气发生器

SB.54

This ChromGas zero air generator incorporates three stages:

• A 0.5 mm coalescing inlet filter removes particles, oil, and water
• A heated catalyst removes hydrocarbons
• A 0.01 mm cellulose fiber outlet filter removes residual particulate material from the product air stream

A hazard-free and economical alternative to high pressure gas cylinders, this unit should pay for itself in a year or two.

Features/Benefits

• Eliminates need for expensive gas cylinders
• Compact; requires less than one square foot of bench space
• Can be used anywhere that an electrical supply is available
• Only requires an upstream compressed air source

Maintenance

• Clean the inlet and outlet filters every six months
• Change the inlet and outlet filters every two years

Specifications

• Inlet Pressure: 2-125 psig
• Outlet Purity: <0.1 ppm hydrocarbons (as methane)
• Outlet Pressure: 125 psig
• Outlet Fitting: 1/8 in. compression
• Power Needs: 110 V (60 Hz), or 230 V (50 Hz)
• Shipping Weight (Model 1000 and 1001): 11 lb (5 Kg)
• Shipping Weight (Model 3500 and 3501): 20 lb (9.1 Kg)
• Dimensions (Model 1000 and 1001; H x W x D): 9.75 in. x 5.75 in. x 12 in. (25 cm x 14.7 cm x 30.8 cm)
• Dimensions (Model 3500 and 3501; H x W x D): 12 in. x 6.75 in. x 15 in. (29.2 cm x 17.8 cm x 39.4 cm)

Marks

• CE approved
• UL listed
• CSA listed
• IEC 1010 certified

Catalytic Zero air generator may be used to measure zero air count rates after field measurements, to determine atmospheric concentrations of volatile organic compound using On-line proton transfer reaction-mass spectrometry (PTR-MS). It may also be used to obtain volatile organic compound-air which could be used to dilute the standard gas to 50 ppb required to calibrate PTR-MS.

Chromgas is a registered trademark of Parker Hannifin
Parker is a registered trademark of Parker Hannifin

output flow 1000 cc/min