您的位置：首页 > 产品中心 > Polygard-CN 筒式过滤器 20 in.0.6 μm 7 号 乙丙橡胶
Polygard-CN 筒式过滤器 20 in.0.6 μm 7 号 乙丙橡胶
Polygard® CN Cartridge Filter
| 产品编号： | 4092415 |
| 规格： | pore size 0.6 μm, cartridge nominal length 20 in. (50 cm), Code 7 (2-226; O-rings w/locking-tabs) |
| 包装规格： | 6 pkg |
| 产品类别： | 进口试剂 |
| 品牌： | Millipore |
| 优惠价： | 立即咨询 |
产品别名
Polygard-CN 筒式过滤器 20 in.0.6 μm 7 号 乙丙橡胶
Polygard® CN Cartridge Filter
Polygard-CN Cartridge Filter 20 in. 0.6 μm Code 7 Ethylene-Propylene
基本信息
| eCl@ss | 32031690 |
| General description【一般描述】 | Device Configuration: Cartridge |
| Preparation Note【制备说明】 | Sterilization Method 10 autoclave cycles or SIP @ 126 °C for 30 min Sanitization Protocol 30 min with hot water @ 80 °C |
| Analysis Note【分析说明】 | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥10 L Gravimetric Extractables: after 24-h soak in water |
| Other Notes【其他说明】 | Directions for Use
|
| Legal Information【法律信息】 | CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany |
产品性质
| material【物料】 | EPR seal polypropylene |
| Quality Level【质量水平】 | 400 |
| feature【特点】 | hydrophilic |
| manufacturer/tradename | Polygard |
| parameter【参数】 | 4.8 bar max. differential pressure (70 psid) at 25 ℃ 4.8 bar max. inlet pressure (70 psi) at 25 ℃ |
| cartridge nominal length | 20 in. (50 cm) |
| diam.【直径】 | 7.0 cm (2.75 in.) |
| filtration area【过滤面积】 | 0.84 m2 |
| impurities【杂质】 | ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction) |
| gravimetric extractables | ≤100 mg |
| pore size【孔径】 | 0.6 μm nominal pore size 0.6 μm pore size |
| input | sample type liquid |
| cartridge code | Code 7 (2-226; O-rings w/locking-tabs) |
