广州伟伯科技有限公司
您的位置:首页 > 产品中心 > Silver ink
产品搜索:

Silver ink

产品编号:4084370
规格:75 wt%, LIFT printable
包装规格:5 G
产品类别:进口试剂
品牌:Sigma-Aldrich
优惠价:立即咨询
产品价格
产品编号包装单位单价(元)国内现货国外库存询价单
40843705 G3270
产品别名

Silver ink

Ag ink

Laser induced forward transfer

基本信息
Linear Formula【线性分子式】
Ag
Application【应用】
This Ag ink product is a conductive high viscous ink based on single-crystal silver nanoparticles in an organic solvent, has been designed for LIFT (Laser Induced Forward Transfer) digital printing and laser sintering.

The ink offers:
  • Uniform and reproducible donor layer with low drying speed
  • Stable accurate jetting in different types of laser systems, wide working window of jetting parameters
  • High speed printing (20-50kHz), allowing high throughput
  • Narrow patterning on plastic and glass substrates (line width ∼50 μm, height ∼0.5 μm, spacing ∼50 μm)
  • Laser sintering of LIFT printed pattern, providing good electrical properties


Fit for:
LIFT digital printing
Additive electronic manufacturing
Printed electronics: RFID, FPD, Sensors

Laser induced forward transfer printing (LIFT) is a non-contact, nozzle-free, one step, direct laser writing process.
LIFT can operate under atmospheric conditions, is compatible with low laser fluences, allows the printing of organic and inorganic materials as well as biological elements. The printing process can take place from both liquid and solid phases. It further has a high lateral resolution only defined by the laser spot size. It is a method compatible with inorganic semiconductor sensor fabrication, OLED fabrication and bio printing.
Other Notes【其他说明】
Resistivity (4PP): After laser sintering* ≤ 8 μΩ·cm (≤ 5 bulk) for LIFT printed line (∼1-2 μm thick) on plastic substrate
*Parameters should be optimized depending on line geometry and substrate
Legal Information【法律信息】
Lumisizer is a trademark of LUM GmbH
产品性质
description【描述】
Silver content : 75 wt%
Solvent : Diethylene Glycol Mono Butyl Ether (DGBE)
Surface Tension : 28 dyn/cm (Pendant Drop)
form【形式】
paste
Particle size【粒径】
50-70 nm (by Lumisizer)
90-120 nm (by Lumisizer)
Viscosity【粘度】
50,000-100,000 cP (Shear Rate: 1 s-1
250cP - 450 cP (Shear Rate: 1000 s-1))
density
2.85-3.3
storage temp.【储存温度】
15-25℃
产品说明
Storage and Stability【储存及稳定性】
Keep container tightly closed. Store at room temperature, do not heat above 60 ℃ and do not freeze.
安全信息
Pictograms【象形图】
GHS07,GHS09
Signal word【警示用语:】
Warning
Hazard Statements
H319 - H410
Precautionary Statements
P264 - P273 - P280 - P305 + P351 + P338 - P337 + P313 - P391
Hazard Classifications【危险分类】
Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2
Storage Class Code【储存分类代码】
10 - Combustible liquids
WGK
WGK 3
广州伟伯科技有限公司 版权所有 CopyRight ©2006-2024, All Rights Reserved
工信部备案号:粤ICP备08114744号   Page Run Time: 0.0238